Menu
A+ A A-

MAINTENANCE

Every massage bathtub and steam room has 18 months warranty for any reason. 

Cleaning and Maintenance of Massage Bathtub

  1. It is recommended to use liquid detergents and soft cloth to clean-up massage bathtubs. The detergents must contain no acetone or chlorine water. The tape stains on tub surface can be removed by soft cloth with little gasoline.
  2. Scratches on tub surface can be wiped off by sanding with 1500# abrasive paper and water, and polishing with tooth paste.
  3. Scales on tub surface can be removed by soft cloth with mild acid detergents (like lemon juice and vinegar) after heated.
  4. Please clean the tub frequently to avoid hair or other dusts choking traps and nozzles.
  5. Gilded and chromed parts cannot be occasionally cleaned and should keep far away from organic solvents and chemicals. Note: Silicone sealants and acid gas may damage part surface.
  6. Please don't use shaggy products and detergents with chemical solvents or granules to clean the surface.
  7. Please don’t scratch or slap tub surface with sharp tools or blades. Don’t touch the surface with butts or boiling water over 100ºC.
  8. Drain water in the hose after use.
  9. Cleaning of hydro massage device: Fill up the tub with 40ºC water and detergents (2g/l), then start hydro massage for 5 minutes, and stop to drain. Repeat once and then wipe the tub.
  10. Check whether power lines, switches and contactors are damaged by mice, bugs and ants, to avoid any accidents and losses.
  11. Check whether the supply and drain pipes are broke or folded, and whether the drainage way is choked.

Cleaning and Maintenance of Steam Shower Room

 1. It is recommended to use liquid detergents and soft cloth to clean-up steam shower rooms. The detergents must contain no acetone or chlorine water. The tape stain on room surface can be removed by soft cloth with little gasoline.
  2. Scratch on room surface can be wiped off by sanding with 1500# abrasive paper and water, and polishing with tooth paste.
  3. Scales on room surface can be removed by soft cloth with mild acid detergents (like lemon juice and vinegar) after heated.
  4. Please clean the room frequently to avoid hair or other dusts choking steam jets and outlets of gas sterilizer.
  5. Gilded and chromed parts cannot be occasionally cleaned and should keep far away from organic solvents and chemicals. Note: Silicone sealants and acid gas may damage part surface.
  6. Please don't use shaggy products and detergents with chemical solvents or granules to clean the surface.
  7. Please don’t scratch or slap room surface with sharp tools or blades.
  8. Clean up the steam generator after thermal cycle every twenty times. Inject the cleaning agent (mixed agent of 5-10g citric acid and 1.5-1.7l hot water) into the generator with a hose, plug in after 8-12 hours, and then exhaust the agent through pushing the On-Off key.
  9. Drain water in the steam generator after use to extend its service life.
  10. Be sure to keep good leakage protection of leakage switch by pushing the test button on leakage protection plug. Ensure its well-operated if the leakage switch trips and then switch on by pushing Reset key.
  11. Check whether power lines, switches and contactors are damaged by mice, bugs and ants, to avoid any accidents and losses.
  12. Check whether the supply and drain pipes are broke or folded, and whether the drainage way is choked.


Orange Blue Green

Login or Register